HCPT Cleveland Open Cup Flash Point Tester

HCPT Cleveland Open Cup Flash Point Tester

Brief Introduction:

The HCPT Cleveland Open Cup Flash Point Tester is designed and made as per the National Standard GB/T3536 “Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods), and T0651 “Asphalt Flash Point and Fire Point Test (Cleveland Open Cup Methods)” in the Industry Standard Specification and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is used to determine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flash point of lower than 79 °c.

Product Feature:

(1) Speed rising speed: As per GB/T 3536-83

(2) Ignition mode: By a gas flame (4 mm)

(3) Total power consumption: Not more than 400W

Technical Parameters:

Ambient temperature:
20±5℃
Relative humidity:
< 80%
Power Supply:
220V±10%、50±1Hz
Temperature measuring range:
ambient temp.~350℃Accuracy:  0.2%      Resolution:  0.1℃
Repeatability:
If the flash point temp. higher than 150℃: error< 4℃
If the flash point temp. lower than 150℃: error< 4℃
Temperature rising up speed:
according to GB/T 3536-83 standard
The method of light fire:
gas flame(4mm)
Power:
no more than 400VA

This site is protected by wp-copyrightpro.com