Application: HDAG Transformer Dry Air Generator is widely used in maintenance and installation of large power equipments like transformers and reactors, etc. The equipment can supply dry air at site and is able to be continuously operated without manual assistance. Feature: With double screw air compressor, low temperature condensed to dewater technology, etc. With double screw air compressor, low temperature condensed
Application: The HGC SF6 gas treatment cart is designed for the maintenance of SF6 (Sulphur hexafluoride) filled apparatus, such as gas-insulated transformers，Gas Circuit Breaker (GCB) and Gas Insulated Switchgear (GIS) etc. The HGC system can be used to vacuum, fill SF6 gas into new electrical equipment, and recover insulating gas from the SF6 apparatus in service. After
Brief Introduction: The HITT Automatic Interfacial Tension Tester is designed and made as per GB/T6541 “Test Methods for Interfacial Tension of Petroleum Products between Oils and Water (Ring Methods)”. It is suitable to determine interfacial tension between mineral oils and water under non-equilibrium conditions (Liquid-liquid interface). It can also be used to determine surface tension
Brief Introduction: The dew point transmitter of HDPM with high performance of Finland Vaisala Company is adopted as the core measurement unit of the entire system, it integrates multiple up-to-date research achievement and proprietary technology in measurement of dew point, and it is equipped with precision sampling system for sample gas and intelligent digital processing
Application: KLEANOIL® TPF Series Tap-Changer Oil Filter Unit is for On Load Switch/Tap-Changer is mainly used for cyclic purification of the oil from bypass of the transformer and high voltage switch. Features: It can effectively absorb the trace water and tiny mechanical particles by cyclic purifying system of the bypass while the main system is under normal working.
Application: KLEANOIL® VHP Hydraulic Fluid Filter System is specifically designed for processing hydraulic fluids, so as to remove dirt and moisture from oil and prolong service life. Feature: • Designed for hydraulic fluids purification • Eight models available to accommodate various flow rates • Continuously removes water down to 50 ppm or less • Fluid
Application: Equipped with backing pump and vacuum booster(Roots pump), VTES Transformer Evacuation System Vacuum Pump Skid can be used for vacuumizing transformers of different sizes. Pump speed and operating vacuum can be customized. The equipment is suitable the electric sector, such as power plants and substations. Feature: . One key start, full automatic operation . Multi-stage vacuum
Application: KLEANOIL® HFRP Stainless Steel Fire-Resistant Oil Filtration Machine is mainly designed for treating phosphate ester hydraulic fluids used in power turbine control systems (Electro Hydraulic Controls). The EH oil has a high thermal oxidation stability, and its principle feature is very difficult to ignite and burn. Our HFRP series purifier can rapidly remove moisture, gases, solid
HDLT Insulating Oil Dielectric Loss Tester Brief Introduction: This integrated precious insulation oil dielectric loss tester is for measuring dielectric loss TAN and capacitance of transformer insulation oil.This is a high precision instrument; integrated with oil cup, temperature control instrument, temperature sensor, dielectric loss test bridge, AC test power, and standard capacitor, etc. This integrated
Application: KLEANOIL® COS Centrifugal Oil Cleaning System is disc stack centrifuge that is designed for purification or clarification of fuel oils, lube oils, and various mineral oils used on board marine installations and in industrial applications. Feature: • Suitable for various kinds of oils • High speed separation great efficiency • Interlocked preventive design • Low
This site is protected by wp-copyrightpro.com